Pay attention to the choice of car wash grille?

Car wash grille-glass fiber reinforced plastic grille is also called composite grate board, which is a glass fiber reinforced plastic product made of unsaturated polyester resin as matrix and alkali-free glass fiber as reinforcing material through special process. It has the characteristics of light weight, high strength, corrosion resistance and flame retardant, non-magnetic insulation, bright color samples, and a variety of alternative styles. It is widely used in chemical plants, power plants, operating platforms, filter grids, and trench covers.

The advantages of car wash grille:

One. The glass fiber reinforced plastic grille in the car wash room is light in quality and high in strength, which is not possessed by other ordinary metal plates.

II. High temperature resistance, the temperature can reach 1400 degrees, basically no heat conduction, can be widely used in various large factories.

Three. The glass fiber reinforced plastic grille in the car wash room is wear-resistant and aging-resistant, with a service life of more than 30 years.

Four. High corrosion resistance, can be widely used in chemical plants, sewage treatment plants and other places with poor corrosive environment can choose to use the car wash room glass fiber reinforced plastic grille to replace the previous metal grille.

Five. Car wash room glass fiber reinforced plastic grille non-conductive, anti-skid measures are relatively good, high safety performance.

How to choose the glass steel grating?

1, to determine the need for glass fiber reinforced plastic grating is used to do what, that is, clear its use of the target. For example, the manufacturer of the car wash shop buys the grating plate to prepare the grating plate as the carrier plate for the car wash.

2. After determining the purpose of the glass fiber reinforced plastic grating, it is time to determine the size and specifications of the grating plate used. Through the relevant introduction of the manufacturer, you can have a certain understanding of the grid plate. For example, in the car wash, you can choose a grid plate with a thickness of 2.5cm or a grid plate with a thickness of 3.8cm. In the electroplating equipment factory, the grating plate with a thickness of 2.5cm is commonly used. In the sewage treatment plant, chemical plant is often 3.8cm thickness of the grid plate.

3. After selecting the appropriate thickness of the glass fiber reinforced plastic grating, the size of the grating plate should be calculated when in use. Such as in a car wash. The size of a car wash is mostly 1.220m * 2.440m, while the size of the glass fiber reinforced plastic grille is 1.220*3.660, which needs to be cut before it can be put into use.

4, select the appropriate raw materials to meet the requirements of the glass fiber reinforced plastic grating plate, such as the use of the grating plate in a chemical plant or a sewage treatment plant, you need to choose a high corrosion resistance resin for production.

Car wash grille color matching: with the rapid development of the economy, the car has begun to enter thousands of households, the car beauty industry has also developed and grown, composite glass fiber reinforced plastic grille plate has become one of the car wash shop choice of decoration materials. Size of FRP grille station for car washing: standard parking space: 6*3 m; Small parking space: 2.44*4.88 middle parking space: 3.66*4.88 m; Large parking space: 3.66*6.1 m.

Color matching scheme:

1: Green and red, green glass fiber reinforced plastic grating plate as the main color, giving people the feeling of safety, red as the side color, making the color matching feel elegant.

2: gray and green: gray as the main color, after washing the car, in the light, the car will become very bright, green as a color change, giving people a pleasant feeling.